Analysis of Ceramic Heating Elements of Three Typical Types of Heat-not-burn Smoking Sets

By October 27, 2021Heat not burn news

The ceramic heating element is a new type of high-efficiency, environmentally-friendly and energy-saving ceramic heating element.

Picture: IQOS Internal cutout

MCH is the abbreviation for metal ceramics heater. MCH refers to a ceramic heating element made by printing tungsten-molybdenum or silver-palladium-ruthenium series pastes on a ceramic casting body, after hot pressing and laminating, and then sintering ceramic and metal together under the protection of hydrogen atmosphere at 1600℃. It has the advantages of corrosion resistance, high temperature resistance, long life, high efficiency and energy saving, uniform temperature, good thermal conductivity, and fast thermal compensation.

  • MCH ceramic heating element is a new type of high-efficiency, environmentally friendly and energy-saving ceramic heating element. Compared with PTC ceramic heating element, it can save 20-30% of electric energy under the same heating effect.
  • The surface is safe and non-charged, and the insulation performance is good: it can withstand the withstand voltage test of 4500V/1S, without breakdown, and the leakage current is <0.5mA.
  • The resistance-temperature change is linear, and the temperature can be easily controlled by controlling the resistance.
  • There is no power attenuation for long time use.
  • Rapid heating: the heating element starts at 500W power and the temperature reaches over 600℃ in 20S; its component rated power starts at 10S and the temperature can reach above 200℃.
  • Good thermal uniformity and high power density: ≥50 W/cm2.
  • Environmental protection: It does not contain harmful substances such as lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, etc., and fully complies with EU environmental protection requirements.

IQOS heat-not-burn heating sheet material is generally alumina ceramic or zirconia ceramic, and the thick film material is generally tungsten molybdenum or silver palladium ruthenium series. There are currently three typical types: one is the pointed tip type represented by IQOS, the other is the pointed tip type used by LIL, and the other is the ring-shaped heater. The domestic one is China Tobacco’s ModTank.

 

1. Pointed ceramic heating element

Picture: Ceramic heater with tip piece

feature of product:
Specification: 19.1*4.9*0.4
Resistance: 0.8 to 1.1
TCR: 3300
Advantages: fast heating speed, large heat transfer area, uniform heating and good taste.

2, pointed rod ceramic heating element

Picture: pointed rod ceramic heater

feature of product:
Fast heating, even heating
Good reliability
High stability
Good taste

3. Ring ceramic heating element

Picture: Ring ceramic heater

feature of product:
Annular heating, full combustion
Good reliability
High stability
The taste is mellow, no residue, and no cartridge is wasted

Leave a Reply